Roland GX-24 Specifications

Driving method
Digital control servo motor
Cutting method
Media-moving method
Acceptable media width
2” to 27.5” (50 to 700mm)
Maximum cutting area
Width:22.9” (584mm) Length: 984” (25m)
Acceptable tool
Special blade for CAMM-1 series
Cutting speed
4 to 20ips (10 to 500mm/sec)
Blade force
30 to 250gf
Mechanical resolution
0.000492” (0.0125mm)
Software resolution
0.000984” (0.025mm)
Distance accuracy (1)
Error of less than +/- 0.2% of distance traveled, or +/- 0.004” (+/- 0.1mm), whichever is greater
Repetition accuracy (1) (2)
+/- 0.004” (+/- 0.1mm) or less
Alignment accuracy for printing and cutting when loading printed material (1) (3)
+/- 0.04” (+/- 1mm)
USB interface (compliant with Universal Serial Bus Specification Revision 1.1)
Re-plot memory
Instruction system
Power supply
Dedicated AC adapter
Input: AC 100 to 240 V +/- 10% 50/60 Hz 1.7A
Output:DC 24V, 2.8A
Power consumption
Approx. 30W (including AC adapter)
Acoustic noise level during operation
70 dB(A) or less (according to ISO 7779)
Acoustic noise level during standby
40 dB(A) or less (according to ISO 7779)
33.5” (W) X 12.2” (D) X 9.25” (H)
[851mm (W) X 310mm (D) X 235mm (H)]
35 lb. (16kg)
Packed dimensions
41.2” (W) X 17.75” (D) X 15.2” (H)
[1050mm(W) X 450mm (D) X 390mm (H)]
Packed weight
49 lb. (22kg)
Temperature: 41 to 104 degrees F, (5 to 40 degree C), humidity: 35 to 80% (no condensation)
Included items
AC adapter, power cord, blade, blade holder, separating knife, roller base, tweezers, test-use material, application tape, USB cable, CD-ROM, user’s manual
(1)According to material and cutting conditions as specified by Roland DG Corp.
(2)Excluding material expansion and contraction. Provided that media length is less than 118" (3000mm)
(3)According to Roland DG Corp. measurement criteria:

  • Using the included software from Roland Corp.
  • Using a laser or ink-jet printer having a resolution of 720dpi or better.
  • Excluding glossy or laminated material
  • Excluding effects of printing distortion due to printer precision and effects of material expansion, contraction, or warping.
  • Depending on the ink (black) employed by the printer used, correct sensing may not be possible.