12”(X) x 9.1”(Y) x 1.6”(Z) [305 mm(X) x 230 mm (Y)] x 40mm(Z)
Feed Rate
X, Y-axis : Up to 2.4 ips (60mm/sec). Z-axis : Up to 1.2 ips (30mm/sec)
Software Resolution
0.004” (0.01 mm) /step or 0.001” (0.025 mm ) /step (XY axis only)
Mechanical Resolution
X, Y -axis : 0.0001 in. (0.0025 mm) /step
Spindle Motor
Brushless DC motor, max. 50 W
Revolution Speed
5,000 to 20,000 rpm
Tool Chuck
Cutter holder and collet
Interface
USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial
(RS-232C-compliant)
Instruction System
RML-1
Power Requirements
AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A,
50/60 Hz (overvoltage category II, IEC 60664-1)
Acoustic Noise Level
During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO
7779) (According to ISO 7779)
External Dimentions
15.5" (W) x 24.3" (D) x 23.3" (H) [393 (W) x 616 (D) x 591 (H) mm] When cover is open: 23.56" x 21.5" x 27"
[598 mm (W) x 545 mm (D) x 685 mm]
Weight
75 lb. (34 kg)
Packed Dimensions
32" (W) x 32" (D) x 28" (H) [813 (W) x 813 (D) x 711 (H) mm]
Packed Weight
108 lb. (49 kg)
Operation Temperature
41 to 104 °F(5 to 40 °C )
Operation Humidity
35 to 80 % (no condensation)
Accessories
Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting
screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid
collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM,
Roland EngraveStudioTM CD-ROM, Roland Software Program Guide, Roland EngraveStudioTM Program Guide, and User's Manual
Roland EngraveStudioTM System Requirements
OS
Windows VistaTM (32-bit edition), Windows® XP, or Windows® 2000
CPU
Pentium® III, 1 GHz or faster recommended
RAM
Windows Vista: 512 MB or more recommended Windows XP/2000: 256 MB or more recommended
Copyright Engraving Machines Direct. All Rights Reserved. eCommerce Software by 3dcart.
